| Creator: | khyizang |  |
| URL: | bringmagichome.com page | |
| Notes: | The base unit of a World of Color Sipper Cup is combined with a candle holder from Dollar Tree and a dome constructed from a 2 L plastic beverage bottle. In this example, the centerpiece is a castle light-up ornament, but virtually anything could be chosen, instead. |
| Creator: | khyizang |  |
| URL: | bringmagichome.com page | |
| Notes: | For this hack, we start with components taken from a Glove . The board LEDs are snipped off and the leads fitted with female-female Dupont cables. Diffused RGB LEDs are inserted into the end and slipped into fabric rose buds from the Dollar Store. Florist tape conceals the wiring and the assembly is placed into a vase. Good for anytime but do think about Valentines Day! |
| Creator: | khyizang | |
| URL: | bringmagichome.com page | |
| Notes: | The Glove's board lends itself to replacement of the onboard LEDs with connectors that greatly expand the possibilities available for reimagining. When reconfigured, the results kind of look octopus-like. Here, a single Glove board is used to power three different lanterns resulting in a Mickey Lantern! This always gets favorable comments from viewers. |
Yogis are into flexibility. That's also true for the components we'll look at in this post. Each of these components offers much more flexibility for placement of the LEDs than has been true for the components utilized in the previous posts. This presents some welcome new opportunities.
A Halibut is a bottom fish. Over the years it has evolved such that both eyes are on the same side of it's body. That's a handy arrangement for anything that spends most of it's time on the bottom looking up. Smart Halibut.
| Creator: | khyizang | |
| URL: | bringmagichome.com page | |
| Notes: |
Add either the Magic Wand or the Paintbrush to a 16" paper lantern to create an attractive hanging light that integrates nicely into virtually any room. |
| Creator: | khyizang |  |
| URL: | bringmagichome.com page | |
| Notes: | Now that we have some light pipes available, courtesy of the Glove device, we can try to use them to make some simple shapes. For this one, interlocking hearts are the target. It's Valentine's Day! So let's go for some MWM hearts for our Valentine. |
| Creator: | khyizang |  |
| URL: | bringmagichome.com page | |
| Notes: | The base portion of a World of Color Sipper Cup is used as a base for some Dollar Tree light-up figurines. Adding some plastic artificial snow enhances the diffusion and lends a nice effect. Easy hack. |
| Creator: | khyizang |  |
| URL: | bringmagichome.com page | |
| Notes: | A Chernabog Sipper Cup was relieved of it's Made With Magic components and they were transferred to the base of a 3D castle puzzle. Aligned directly under the turrets, it gives a pleasant effect. Hold on to the Chernabog piece. We'll get back to him on Halloween. |
| Creator: | khyizang |  |
| URL: | bringmagichome.com page | |
| Notes: | Light-up ornaments/figurines are plentiful and often can be had for very little money. Here, holiday themed light-up ornaments were purchased from Dollar Tree that work well as free standing figurines. Components taken from an Ear Hat were placed underneath and concealed with accessory decorations. |
